Adjusting system fan’s duty cycle

Depending on the system fan installed on your system, ROG Front Base allows you to adjust the individual duty cycle of the installed fans.

NOTES:

To control and monitor an installed 3-pin DC control fan or a 4-pin PWM fan using the ROG Front Base, enable each of the fan first in your BIOS.

•To enable the 4-pin PWM fan, go to BIOS > Monitor > Fan Speed Control then set CPU Q-Fan Control to [Auto].

•To enable the 3-pin DC control fan, go to BIOS > Monitor > Fan Speed Control then set CPU Q-Fan Control to [Advance Mode].

To manually adjust a fan’s duty cycle setting:

1.Press and hold the Selection knob until is displayed on the Mode/Status Indicator.

2.Rotate the Selection knob to select a fan.

3.Press the knob to confirm your selection.

4.Rotate the knob to adjust the value of the fan’s duty cycle.

NOTE: ROG Front Base allows duty cycle adjustments in percentage (from 0% to 100%) instead of the actual fan speed.

5.Press the Selection knob to confirm the changes.

14