ENGLISH
QUICK INSTALLATION GUIDE
I.Hardware Installation
1.Turn off your computer and peripheral devices, such as your printer.
2.Ground yourself by using a wrist strap. If you do not have one, touch both of your hands to a safely grounded object or to a metal object on your system.
3.Remove the cover from your computer.
4.Set your drive as either the Master or Slave (default) drive by placing the jumper cap on the desired jumper.
5.Insert the DVDROM Drive into one of the free
6.Connect an unused power supply cable to the back of your DVDROM Drive.
7.Connect the
8.If you have a sound card, connect the
9.If you removed any drive or other items other than your DVDROM Drive, put them back into place and secure them to your computer.
10.Slide your DVDROM Drive now into place and fasten it to your system with the screws provided.
11.Replace the cover on your computer and secure it with the screws you removed earlier.
12.Reconnect the power supply.
II.Software Installation
1.For DOS/Windows 3.x, insert the DVDROM Driver for DOS/Win 3.x Installation disk into either drive A or drive B, type A: install (or B: install) and then press [Enter], choose your preferred setup option and then follow the instructions on the screen, and then restart your computer after installation is complete.
2.For Windows 9x or Windows NT, Windows will automatically detect and deter- mine the current settings for your drive and install the correct driver.
3.For other operating systems, your DVDROM Drive supports the ATAPI drive inter- face and your system should be able to load the appropriate driver for your drive.
Sound Card | Power Supply |
Power
Switch 
Power Supply
Cables
Insert Your DVDROM Drive | |
Drive | Into a Free Drive Bay |
ASUS | 17 |