English

Backing up the Factory Default Environment Data to a USB Drive (F9 Backup)

1.Repeat steps 1–3 in the previous section.

2.Select Backup the Factory Environment to a USB Drive and click Next.

3.Connect a USB storage device to your PC to start the Factory Default Environment backup.

The required size of the connected USB storage device should be larger than 20GB.The actual size may vary with your PC model.

4.Select a desired USB storage device if more than one USB storage device is connected to your PC and click Next.

If there is already a partition with proper size in the selected USB storage device (for example, a partition that has been used as the backup partition), the system will show this partiton automatically and reuse it for backup.

5.Based on the different situations in the previous step, data on the selected USB storage device or on the selected partition will be cleared. Click Backup to start backup.

You will lose all your data on the selected USB storage device or on the selected partition. Ensure to back up your important data beforehand.

6.When backing up the factory default environment is successfully completed, click Reboot to restart the system.

32 EB1030/ EB1031/ EB1033