Asus ET1605 6. Driver Setup, 7. Troubleshooting

6. Driver Setup

The T2 3-in-1 Upgrade card is a Plug-n-Play device which can be auto-detected by Windows® 98/ 2000/ME/XP. After the card is inserted into a PCI slot, turn on your computer. A Found New Hardware Wizard window appears on the screen during startup. Follow the screen instructions to setup the card driver. If your computer failed to detect the card, click Start > Control Panel > Add New Hardware. Follow the instructions to setup the card driver manually.

NOTE:

For details on device driver installation, refer to “Chapter 3: Starting Up” of the Terminator 2 User Guide.

7. Troubleshooting

Q: What should I do if:

•Windows can not detect the card during startup, or

•After the driver is loaded, an exclamation mark appears before PCI FireWire (IEEE 1394) in the Device Manager?

A: Make sure that the card is firmly seated on the PCI slot.

ASUS T2 3-in-1 Upgrade User’s Guide 11