Chapter 2: Using your All-in-One PC

Assembling the base of your All-in-One PC

English

1.Place the All-in-One PC on a flat and stable surface such as a table or desk.

2.Align and attach the base to the stand. Ensure that the stand is fitted firmly and aligned properly to the base.

NOTE: The stand fits to the base in one orientation only.

3.Secure the base to the stand with the bundled screw using a Phillips or a flat screwdriver. You can also use a coin or token.

screw

base stand

NOTE: The illustration above are for reference only. The actual base of your AiO may vary depending on the model but the installation steps remains the same.

Positioning your All-in-One PC

1. Place your All-in-One PC on a flat surface

25O

-5O

such as a table or desk.

 

2.Tilt the display to an angle between -5oto 25o.

IMPORTANT! Avoid adjusting the display to an angle beyond the recommended values or you may risk damaging the All-in-One PC.

All-in-One PC ET232 Series

17