The following two items appear only when you set the HD Audio Device item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high- definition audio depending on the audio standard that the front panel audio module supports.
[HD] | Sets the front panel audio connector (AAFP) mode to high definition audio. |
[AC97] | Sets the front panel audio connector (AAFP) mode to legacy AC’97. |
SPDIF Out Type [SPDIF]
[SPDIF] | Sets to [SPDIF] for SPDIF audio output. |
[HDMI] | Sets to [HDMI] for HDMI audio output. |
Realtek LAN Controller [Enabled]
[Enabled] | Enables the Realtek LAN controller. |
[Disabled] | Disables the controller. |
Realtek PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN Controller item to [Enabled] and allows you to enable or disable the Rom Help of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]
Asmedia USB 3.0 Controller [Enabled]
[Enabled] | Enables the onboard USB 3.0 controller. |
[Disabled] | Disables the controller. |
Asmedia USB 3.0 Battery Charging Support [Enabled]
This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled].
[Enabled] | Enables the Asmedia USB 3.0 battery charging function. |
[Disabled] | Disables this function |
Serial Port Configuration
The
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Configuration options: [Enabled] [Disabled]
Change Settings Auto]
This item appears only when you set the previous item to [Enabled] and allows you to select the Serial Port base address.
Configuration options: [Auto] [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.5.6APM
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
|
|
ASUS |
