Device Mode [Auto]
Allows you to set the Printer port mode. Configuration options: [STD Printer Mode] [SPP Mode]
2.5.6APM
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
Power On By PS/2 Keyboard [Disabled]
[Disabled] | Disables the Power On by a PS/2 keyboard. |
[Space Bar] | Sets the Space Bar on the PS/2 keyboard to turn on the system. |
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. | |
[Power Key] | Sets Power key on the PS/2 keyboard to turn on the system. This feature |
| requires an ATX power supply that provides at least 1A on the +5VSB lead. |
Power On By PS/2 Mouse [Disabled]
[Disabled] | Disables the Power On by a PS/2 mouse. |
[Enabled] | Enables the Power On by a PS/2 mouse. This feature requires an ATX |
| power supply that provides at least 1A on the +5VSB lead. |
Power On By PME [Disabled]
[Disabled] | Disables the PME to wake up by PCI/PCIE devices. |
[Enabled] | Allows you to turn on the system through a PCI/PCIE LAN or modem card. |
| This feature requires an ATX power supply that provides at least 1A on the |
| +5VSB lead. |
Power On By Ring [Disabled]
[Disabled] | Disables Ring to generate a wake event. |
[Enabled] | Enables Ring to generate a wake event. |
Power On By RTC [Disabled]
[Disabled] | Disables RTC to generate a wake event. |
[Enabled] | When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ |
| Minute/Second will become |
RTC Alarm Date (Days)
This item appears only when you set the previous item to [Enabled] and allows you to select RTC alarm time (days). When you set the time to zero, the RTC alarms everyday. Use <+> and
- Hour / - Mimute / - Second
Allows you to set the RTC alarm time. Use <+> and
Chapter 2: BIOS information |