6.USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.
7.USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.
8.D-Sub port. This 15-pin port connects to a VGA monitor or other VGA-compatible devices.
9.PS/2 Keyboard port. This port connects to a PS/2 keyboard.
1.8.2Internal connectors
1.Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
AGND NC SENSE1 RETUR | SENSE2 RETUR |
AAFP | |
PIN 1 | SENSE_SEND PORT2 L |
PORT1 L PORT1 R PORT2 R |
H61M-E | |
HD-audio-compliant
pin definition
PIN 1
Line out_L
NC
Line out_R
MICPWR
MIC2
Legacy AC’97
compliant definition
H61M-E Front panel audio connector
•We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.
•If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.
1-22 | Chapter 1: Product introduction |