Asus H81IPLUS H81I-PLUSATX power connectors, H81I-PLUSSpeaker Out Connector, 6.Speaker connector (4-pinSPEAKER), 5.ATX power connectors (24-pinEATXPWR, 4-pinATX12V)

5.ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

ATX12V EATXPWR

+12V DC +12V DC

PIN 1

H81I-PLUS GND GND

+3 Volts		GND
+12	Volts	+5 Volts
+12	Volts	+5 Volts
+5V Standby		+5 Volts
Power OK		-5 Volts
	GND	GND
+5 Volts		GND
	GND	GND
+5 Volts		PSON#
	GND	GND
+3	Volts	-12 Volts
+3	Volts	+3 Volts
	PIN 1

H81I-PLUS ATX power connectors

•We recommend that you use an ATX 12V Specification 2.0‑compliant power supply unit (PSU) with a minimum of 350W power rating. This PSU type has 24-pin and 4-pin power plugs.

•DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will not boot up.

•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

6.Speaker connector (4-pin SPEAKER)

The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.

H81I-PLUS

SPEAKER

Speaker Out

GND GND +5V

PIN 1

H81I-PLUS Speaker Out Connector

ASUS H81I-PLUS 1-15