Asus H81M-C, H81M-C/CSM 1.7.1Rear panel connectors, 1.7Connectors, port, 3. LAN, Status, Status, (RJ-45), Speed LED, Description, Description, 2. Parallel port

3.USB device wake-up (USBPW9~12)

This jumper allows you to enable or disable the USB device wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the USB keyboard or by clicking on the USB mouse. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

H81M-C	USBPW9-12
	1	2	2	3

+5V +5VSB (Default)

H81M-C USB Device Wake Up

1.7Connectors

1.7.1Rear panel connectors

1 2 3 4 5

11 10 9 8 7 6

1. PS/2 mouse port (green). This port is for a PS/2 mouse.

2. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices.

3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

LAN port LED indications				Activity Link			Speed
					LED		LED
Activity/Link LED		Speed LED
Status	Description	Status	Description
Off	No link	OFF	10Mbps connection
Orange	Linked	ORANGE	100Mbps
						LAN port
			connection
Orange (Blinking)	Data activity	GREEN	1Gbps connection
Orange (Blinking	Ready to wake
then steady)	up from S5 mode

1-12 Chapter 1: Product introduction