USB Controller Support [USB 1.1+USB 2.0]

Allows you to disable or set the USB controller support type. Configuration options: [Disabled] [USB 1.1 only] [USB 1.1+USB 2.0]

Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.

Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed]

4.4.6 Onboard Devices Configuration

Configure ITE8712 Super IO Chipset

Serial Port1

Address

[3F8/IRQ4]

Serial Port2

Address

[2F8/IRQ3]

Parallel Port Address

[378]

Parallel Port Mode

[EPP+ECP]

EPP Version

[1.9]

ECP Mode DMA Channel

[DMA3]

Parallel Port IRQ

[IRQ7]

OnBoard Game

Port

[Enabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]

Serial Port2 Address [2F8/IRQ3]

Allows you to select the Serial Port2 base address.

Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses.

Configuration options: [Disabled] [378] [278] [3BC]

ASUS K8N-E Deluxe motherboard

4-23