Asus K8N-E 4.4.5 Chipset, GART Error Reporting [Disabled], Memclock Mode [ Auto], MemClock Value [200 MHz], CAS Latency (CL) [Auto], DRAM RAS TO CAS Delay [Auto]

GART Error Reporting [Disabled]

Enables or disables the GART Error Reporting feature. This option should always be disabled for normal operation. Device driver developers may enable it for testing purpose. Configuration options: [Disabled] [Enabled]

4.4.5 Chipset

The items in this menu show the chipset-related information auto-detected by BIOS.

Memory CLK	: 200 MHz
CAS Latency	: 2.5
DRAM RAS TO	CAS Delay : 3 CLK
DRAM ACTIVE	TIME : 8 CLK
DRAM RAS PRECHANGE TIME : 3 CLK
MemClock Mode		[Auto]
CAS Latency		[Auto]
DRAM CAS to	CAS Delay	[Auto]
DRAM RAS PRECHANGE Time		[Auto]
DRAM ACTIVE	TIME	[Auto]
Master ECC Enabled		[Disabled]
Audio CODEC	Interface	[Auto]
Primary Video		[PCI]
Aperture Size		[ 128 MB]
AGP FW Enable		[Auto]
AGP SideBand Address		[Auto]
Onboard Device
USB Configuration

MEMCLK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values.

Memclock Mode [ Auto]

Allows you to set the memory clock mode. Set by the code using [Auto] or select [Manual] to set using one of the standard values.

Configuration options: [Auto] [Manual]

MemClock Value [200 MHz]

Sets the Memory clock value. This item appears only when the MemClock Mode item is set to Manual.

Configuration options: [200 MHz] [266 MHz] [333 MHz] [400 MHz]

CAS Latency (CL) [Auto]

Sets the CAS Latency value.

Configuration options: [Auto] [2.0] [3.0] [2.5]

DRAM RAS TO CAS Delay [Auto]

Sets the DRAM RAS TO CAS Delay.

Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]

ASUS K8N-E Deluxe motherboard 4-19