USB 1.1 Ports Configuration [USB 8 Ports]

Allows you to set the number of USB ports to activate.

Configuration options: [Disabled] [USB 2 Ports] [USB 4 Ports] [USB 6 Ports] [USB 8 Ports]

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Auto] [Disabled] [Enabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller to HiSpeed (480Mbps) or FullSpeed (12Mbps). Configuration options: [HiSpeed] [FullSpeed]

When you use a USB mass storage device, a USB mass storage device configuration option will display. And this option is hid if no USB mass storage detected.

USB Mass Storage Device Configuration

 

Enables 1.1 USB

USB Mass Storage Reset Delay

[20 Sec]

host controllers.

 

 

Device #1USB Flash Disk

 

 

 

Emulation Type

[Auto]

 

 

Device #2USB Flash Disk

 

 

 

Emulation Type

[Auto]

 

 

 

 

←→

Select Screen

 

 

↑↓

Select Item

 

 

+-

Change Option

 

 

F1

General Help

 

 

F10

Save and Exit

 

 

ESC

Exit

v02.54 (C)Copyright 1985-2003, American Megatrends, Inc.

2-18

Chapter 2: BIOS Information