IRQ xx [Available]

When set to [Available], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices.

Configuration options: [Available] [Reserved]

2.4.5 JumperFree Configuration

Configure System Frequency/Voltage

CPU FSB Frequency

[200 MHz]

CPU Speed/Voltage Setting

[Auto]

DDR Voltage

[Auto]

AGP Voltage

[1.5V]

V-Link Voltage

[2.5V]

Performance Mode

[Auto]

CPU FSB Frequency [200MHz]Allows you to adjust the CPU FSB operating frequency.Configuration options: [200MHz] [201 MHz] ~ [300MHz]CPU Speed/Voltage Setting [Auto]Allows you to set the CPU speed and voltage setting.Configuration options: [Auto] [Manual]CPU Speed [800 MHz]

Allows you to manuallyset the CPU speed. The configuration options vary depending on the speed of the processor installed. This item appears only when the CPU Speed/Voltage Setting item is set to Manual.

CPU Voltage [1.450 V]

Allows you to manually set the CPU voltage. The configuration options vary depending on the speed of the processor installed. This item appears only when the CPU Speed/Voltage Setting item is set to Manual.

Setting a low CPU voltage can cause system boot failure!DDR Voltage [Auto]

Allows you to automatically detect or select from a list the DDR operating voltage. Configuration options: [Auto] [2.6V] [2.7V] [2.8V]

AGP Voltage [1.5V]Adjusts the AGP voltage setting.Configuration options: [1.5V] [1.7V]

2-24

Chapter 2: BIOS Setup