Asus K8V-X Memory Configuration, Memclock Mode [ Auto], Memory Configuration, HT Frequency [800 MHz], CRC Flood Enable [Disabled], HT DATA Width (Upstream) [16 BIT]

CRC Flood Enable [Disabled]

Enables or disables the CRC Flood that enable the generation of syncronized packets on CRC Error. Configuration options: [Disabled] [Enabled]

HT Frequency [800 MHz]

Allows frequency selection of HyperTransport transfer from K8 CPU to AGP. Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]

HT DATA Width (Upstream) [16 BIT]

Allows selection of HyperTransport upstream data width.

Configuration options: [16 BIT] [8 BIT]

HT DATA Width (Downstream) [16 BIT]

Allows selection of HyperTransport downstream data width.

Configuration options: [16 BIT] [8 BIT]

Memory Configuration

Memory Configuration

Memory Configuration

ECC Configuration

Memory Configuration

The Memory configuration menu item allows you to change thememory settings. Select an item then press <Enter> to display the sub-menu.

Memory Configuration		MEMCLK can be set
		by the code using
Memclock Mode	[Auto]	AUTO, or if you use
Bank Interleaving	[Auto]	LIMIT, you can set
CAS Latency (CL)	[Auto]	one of the standard
TRC	[Auto]	values.
TRFC	[Auto]
TRCD	[Auto]
TWR	[Auto]
TRWT	[Auto]
TRAS	[Auto]
TRP	[Auto]
DDR Clock Delay	[Auto]
2T Command	[Auto]

Memclock Mode [ Auto]

Allows you to set the memory clock mode. Set by the code using [Auto] or select [Manual] to set using one of the standard values.

Configuration options: [Auto] [Limit]

ASUS K8V-X motherboard 2-15