HyperTransport Configuration

HyperTransport Configuration

 

 

Enabled link tristate

 

 

 

during the disconnect

HT Tristate Enabled

[Enabled]

state of an LDTSTOP

CRC Flood Enable

[Disabled]

 

HT Frequency

[800 MHz]

 

HT DATA Width (Upstream)

[16

BIT]

 

HT DATA Width (Downstream)

[16

BIT]

 

HT Tristate Enable [Enabled]

Enables or disables the HyperTransport Tristate that enables the tristate link during the disconnected state of an LDTSTOP.

Configuration options: [Disabled] [Enabled]

CRC Flood Enable [Disabled]

Enables or disables the CRC Flood that enable the generation of syncronized packets on CRC Error.

Configuration options: [Disabled] [Enabled]

HT Frequency [800 MHz]

Allows frequency selection of HyperTransport transfer from K8 CPU to AGP. Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]

HT DATA Width (Upstream) [16 BIT]

Allows selection of HyperTransport upstream data width. Configuration options: [16 BIT] [8 BIT]

HT DATA Width (Downstream) [16 BIT]

Allows selection of HyperTransport downstream data width. Configuration options: [16 BIT] [8 BIT]

4-16

Chapter 4: BIOS Setup