Configuring the network connection

Configuring a dynamic IP/PPPoE network connection To configure a dynamic IP/PPPoE network connection:

1.Go to Start > Control Panel > Network and Sharing Center.

2.From the Network and Sharing Center screen, click Change Adapter settings.

3.Right-click on your LAN and select Properties.

4.Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.

5.Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select

Use the following IP address: and key in IP address and Subnet mask.

6.Select Obtain DNS server address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS server addresses: and key in the

Preferred and Alternate DNS server.

7.Click OK when done.

Continue to the next steps if you are using PPPoE connection.

ENGLISH

ASUS M11AA

43