Asus M2N-PLUS SLI 4.3.4Primary/Secondary IDE Master/Slave, Primary/Secondary IDE Master/Slave [Auto], Access Mode [Auto]

4.3.4Primary/Secondary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.

Phoenix-AwardBIOS CMOS Setup Utility

Main

	Primary IDE Master			Select Menu
Primary IDE Master		[Auto]		Item Specific Help
Access Mode		[Auto]		Press [Enter] to
Capacity		0	GB	select.
Cylinder		0
Head		0
Sector		0
PIO Mode		[Auto]
UDMA Mode		[Auto]
Transfer Mode		None
F1:Help	↑↓ : Select Item	-/+: Change Value		F5: Setup Defaults
ESC: Exit	→←: Select Menu	Enter: Select SubMenu		F10: Save and Exit

The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not user‑configurable. These items show N/A if no IDE device is installed in the system.

Primary/Secondary IDE Master/Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, the BIOS automatically fills in the correct values for the remaining fields on this sub-menu. If the hard disk was already formatted on a previous system, the setup BIOS may detect incorrect parameters. Select [Manual] to manually enter the IDE hard disk drive parameters. If no drive is installed select

[None]. Configuration options: [None] [Auto] [Manual]

Access Mode [Auto]

The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. Configuration options: [CHS] [LBA] [Large] [Auto]

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

ASUS M2N-Plus SLI Vista Edition 4-15