Asus M2N-PLUS SLI 4.6.6Security, Typematic Rate (Chars/Sec) [6], Typematic Delay (Msec) [250], OS Select for DRAM > 64MB [Non-OS2], Full Screen LOGO [Enabled], User Password

Typematic Rate (Chars/Sec) [6]

Allows you to select the rate at which a character repeats when you hold a key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]

Typematic Delay (Msec) [250]

Allows you to set the delay before keystrokes begin to repeat.

Configuration options: [250] [500] [750] [1000]

OS Select for DRAM > 64MB [Non-OS2]

Set this item to OS2 only when you are running on an OS/2 operating system with an installed RAM of greater than 64 KB. Configuration options: [Non-OS2] [OS2]

Full Screen LOGO [Enabled]

Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled]

Make sure that the above item is set to [Enabled] if you want to use the ASUS MyLogo2™ feature.

Halt On [All, But Keyboard]

Allows you to error report type.

Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette] [All, But Disk/Key]

4.6.6Security

Phoenix-AwardBIOS CMOS Setup Utility

Boot

Security		Select Menu
Supervisor Password	Clear	Item Specific Help
User Password	Clear
Password Check	[Setup]	Supervisor password
Security Chip	[Disabled]
		controls full access,
		<Enter> to change
		password.

Supervisor Password

User Password

These fields allow you to set passwords:

To set a password:

1.Select an item then press <Enter>.

2.Type in a password using a combination of a maximum of eight (8) alpha- numeric characters, then press <Enter>.

ASUS M2N-Plus SLI Vista Edition 4-37