Asus M2NPV-VM 1.7.1Overview, 1.7.2Memory configurations, 1.7System memory

1.7System memory

1.7.1Overview

The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets.

A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket.

The figure illustrates the location of the DDR2 DIMM sockets:

DIMM B1 DIMM B2 DIMM A1 DIMM A2

M2NPV-VM

M2NPV-VM 240-pin DDR2 DIMM sockets

Channel	Sockets
Channel 1	DIMM_A1 and DIMM_B1
Channel 2	DIMM_A2 and DIMM_B2

1.7.2Memory configurations

You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC/non-ECC DDR2 DIMMs into the DIMM sockets.

•For dual-channel configuration, the total size of memory module(s) installed per channel must be the same (DIMM_A1+ DIMM_A2 = DIMM_B1+ DIMM_B2)

•Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. Refer to the DDR2 Qualified Vendors List below for details.

•Due to chipset resource allocation, the system may detect less than 8 GB system memory when you installed four 2 GB DDR2 memory modules.

•This motherboard does not support memory modules made up of 128 Mb chips or double sided x16 memory modules.

1 - 14 Chapter 1: Product introduction