4.3.5SATA1/2/3/4

While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information.

Phoenix-Award BIOS CMOS Setup Utility

Main

 

SATA1

 

Select Menu

 

 

 

 

Extended IDE Drive

[Auto]

 

Item Specific Help

Access Mode

[Auto]

 

Selects the type of

 

 

 

Capacity

164

GB

fixed disk connected

 

 

 

to the system.

Cylinder

65535

 

 

Head

16

 

 

Landing Zone

65534

 

 

Sector

255

 

 

 

 

 

 

F1:Help

↑↓ : Select Item

-/+: Change Value

F5: Setup Defaults

ESC: Exit

→←: Select Menu

Enter: Select SubMenu

F10: Save and Exit

 

 

 

 

The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Landing Zone and Sector). These values are not user- configurable. These items show 0 if no SATA device is installed in the system.

Extended IDE Drive [Auto]

Selects the type of fixed disk connected to the system.

Configuration options: [None] [Auto]

Access Mode [Auto]

Sets the sector addressing mode.

Configuration options: [Large] [Auto]

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

Capacity

Displays the auto-detected hard disk capacity. This item is not configurable.

Cylinder

Shows the number of the hard disk cylinders. This item is not configurable.

4-16

Chapter 4: BIOS setup