Change User Password

Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a User Password:

1.Select the Change User Password item and press <Enter>.

2.On the password box that appears, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you set your password successfully. To change the user password, follow the same steps as in setting a user password.

Clear User Password

Select this item to clear the user password.

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always]

2.7Tools menu

 

 

 

BIOS SETUP UTILITY

Main

Advanced

Power

Boot

Tools

Exit

ASUS EZ Flash 2

 

 

 

 

Express Gate

 

[Enabled]

 

 

Enter OS Timer

 

[10 Seconds]

 

Reset User DATA

 

[No]

 

 

AI NET2

 

 

 

 

Press ENTER to run the utility to select and update BIOS.

This utility doesn't support :

1.NTFS format

Select Screen

Select Item +- Change Field Enter Go to Sub Screen

F1 General Help

F10 Save and Exit ESC Exit

v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.

2.7.1ASUS EZ Flash 2

Allows you to run ASUS EZ Flash 2. When you press <OK>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <OK> to confirm your choice.

Chapter 2: BIOS setup

2-23