2.3.5Storage Configuration

The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press <Enter> if you wish to configure the item.

IDE Configuration

 

DISABLED: disables

 

 

the integrated IDE

Onboard PCI IDE Controller

[Enabled]

Controller.

OnChip S-ATA Controller

[Enabled]

ENABLED: enables

SATA Mode select

[SATA Mode]

the integrated IDE

 

 

Controller.

Onboard PCI IDE Controller [Enabled]

Allows you to enable or disable the onboard PCI IDE controller. Configuration options: [Enabled] [Disabled]

OnChip S-ATA Controller [Enabled]

Allows you to disable or set the OnChip S-ATA devices.

Configuration options: [Enabled] [Disabled]

SATA Mode select [SATA Mode]

Allows you to select the SATA Mode. Configuration options: [SATA Mode] [RAID Mode] [AHCI Mode]

The following items appears only when the SATA Mode select item is set to [RAID Mode].

SATA1/2/3/5/6 [Enabled]

Allows you to disable or enable the SATA1/2/3/5/6.

Configuration options: [Disabled] [Enabled

ESATA [Enabled]

Allows you to disable or enable the ESATA.

Configuration options: [Disabled] [Enabled

2-18

Chapter 2: BIOS setup