3 Chapter

ErP Ready [Disabled]

[Disabled]

Disables the Energy Related Products (ErP) Ready function.

[Enabled]

Allows BIOS to switch off some power at S5 state to get system ready for

 

the ErP requirement. When set to [Enabled], power for WOL, WO_USB,

 

audio and onboard LEDs will be switched off at S5 state.

Restore AC Power Loss [Power Off]

When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss.

Configuration options: [Power Off] [Power On] [Last State]

Power On By PS/2 Device [Enabled]

[Disabled]

Disables the PS/2 devices from generating a wake event.

[Enabled]

Enables the PS/2 devices to generate a wake event.

Power On By PME Device [Enabled]

[Disabled]

Disables the PME devices from generating a wake event.

[Enabled]

Enables the PME devices to generate a wake event.

Power On By Ring [Disabled]

[Disabled]

Disables the Ring devices from generating a wake event.

[Enabled]

Enables the Ring devices to generate a wake event.

Power On By RTC [Disabled]

[Disabled]

Disables RTC from generating a wake event.

[Enabled]

When set to [Enabled], the items RTC Alarm Date (Days) and Hour/

 

Minute/Second will become user-configurable with set values.

3.5.9Network Stack

Network stack [Disabled]

This item allows user to enable/disable UEFI network stack function.

Configuration options: [Disabled] [Enabled]

3-26

Chapter 3: BIOS setup