3 Chapter
Network Stack Driver Support [Disabled]
[Disabled] | Select this item to skip the network stack driver from loading during |
| POST. |
[Enabled] | Select this item to load the network stack driver during POST. |
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.
Hardware Fast Boot [Disabled]
Allows the system to enable or disable the hardware fast boot.
Configuration options: [Disabled] [Enabled]
DirectKey [Enabled]
[Disabled] | Disables the DirectKey button. The system will only power on or off when |
| you press the DirectKey button. |
[Enabled] | Allows the system to power on and go to the BIOS Setup directly when you |
| press the DirectKey button. |
Boot Logo Display [Auto]
[Auto] | Automatically djusts the logo display for Windows® requirements. |
[Full Screen] | Maximize the boot logo size. |
[Disabled] | Hides the boot logo during POST. |
The following items appears only when you set the Boot Logo Display item to [Disabled].
Post Report [5 sec]
This item allows you to select the desired Post Report waiting time. The values range from 0 to 10 seconds or until the <Esc> button is pressed.
The following items appears only when you set the Boot Logo Display item to [Auto] or [Full Screen].
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds.
This feature will only work when set under normal boot.
Bootup NumLock State [On]
[On] | Set the |
[Off] | Set the |
Chapter 3: BIOS setup |