Asus Motherboard 2.4.4 Chipset, Configure DRAM Timing by SPD [Enabled]

2.4.4 Chi pset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.

Advanced Chipset Settings
Configure DRAM Timing by SPD	[Enabled]
Hyper Path 3	[Auto]
DRAM Throttling Threshold	[Auto]
Booting Graphic Adapter Priori	[PCI Express/Int-VG]
Internal Graphics Mode Select	[Enabled, 8MB]
Graphics memory type	[Auto]
Boot Display Device	[Auto]
Flat Panel Type	[Type 1]		Select Screen
Local Flat Panel Scaling	[Auto]
TV Connector	[Auto]		Select Item
HDTV Output	[Auto]	+-	Change Option
TV Standard	[VBIOS-Default]	F1	General Help
		F10	Save and Exit
PEG Buffer Length	[Auto]	ESC	Exit
Link Latency	[Auto]	+-	Change Option
		F1	General Help
PEG Root Control	[Auto]
		F10	Save and Exit
Slot Power	[Auto]
		ESC	Exit
High Priority Port Select	[Disabled]

Confi gure DRAM Ti mi ng by SPD [Enabl ed]

When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. The following sub-items appear when this item is Disabled.

Configuration options: [Disabled] [Enabled]

DRAM CAS# Latency [5 Clocks]

Controls the latency between the SDRAM read command and the time the data actually becomes available.

Configuration options: [6 Clocks] [5 Clocks] [4 Clocks] [3 Clocks]

DRAM RAS# Precharge [4 Clocks]

Controls the idle clocks after issuing a precharge command to the DDR SDRAM. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks]

[5 Clocks] [6 Clocks]

DRAM RAS# to CAS# Delay [4 Clocks]

Controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] [6 Clocks]

DRAM RAS# Activate to Precharge [15 Clocks] Sets the RAS Activate timing to Precharge timing. Configuration options: [4 Clock] [5 Clocks] ~ [18 Clocks]

ASUS P5L-MX 2-23