Configure authentication settings
A wireless network can be added either when the network is detected, or manually by entering settings information. To determine if authentication information is needed, see your network administrator.
To configure authentication settings:1.To manually enter information, tap 
> Settings > Connections tab > Connections > Network Card > Wireless tab.
2.Tap Add new. If the network was detected, step one and two are not necessary.
3.To use data encryption, tap Data encryption (WEP enabled).
4.To use Shared Key authentication, tap Network Authentication (shared mode). You need a network key.
5.To automatically use a network key, tap The key is provided for me automatically. Otherwise, enter the network key.
6.For increased security, select Use IEEE 802.1x network access control, then select the appropriate EAP type.
Change connection settings name
Your mobile device is already set up with two sets of connection settings: My ISP and My Work Network. You can change the name of these settings to something more familiar. For example, if you put all of your corporate settings under My Work Network, you can change the name from My Work Network to your company name.
To change a connection name:1.Tap 
> Settings > Connections tab > Connections.
2.Under My ISP or My Work Network, tap Manage existing connections.
3.Tap the General tab.
4.Enter a name for the settings.
Get connected |