Product Overview
ASUS NFC Express box | ASUS NFC tag |
Power LED |
|
NFC sensing | NFC sensing area |
area |
|
USB 3.0 port for PC connection | USB 3.0 ports |
Parts and description
•Power LED
This LED indicator lights up when the NFC Express is currently in use.•NFC sensing area
To use the NFC, put the NFC tag or another
•USB 3.0 port for PC connection
Insert the bundled USB cable into this port to supply power to your ASUS NFC Express box while connected to your desktop PC.
•USB 3.0 ports
These two USB (Universal Serial Bus) ports support USB 3.0 devices.NOTES:
-DO NOT connect a keyboard/mouse to any USB 3.0 port when installing the Windows® operating system.
-Use USB 3.0 devices under Windows® 8 and ensure that you have installed the USb 3.0 driver.
-USB 3.0 devices can only be used for data storage.
-We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance of your USB 3.0 devices.
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• | This device may not cause harmful interference. |
• | This device must accept any interference received including interference that may cause undesired |
| operation. |
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
WARNING! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Labeling requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC: Canadian Compliance Statement
Complies with the Canadian
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes :
(1)cet appareil ne doit pas provoquer d’interférences et
(2)cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian
Australia statement notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit http://support.asus.com. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http:// support.asus.com
CE: European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields
NCC Warning
KCC Warning
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from http://support.asus.com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: ASUSTeK Computer Inc. Legal Compliance Dept.15 Li Te Rd.,Beitou, Taipei 112, Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Ver. 130208 |
|
|
|
|
| Position : CEO Name : Jerry Shen |
| Declaration Date: 17/05/2013 Year to begin affixing CE marking:2013 Signature : __________ |
| |||
EC Declaration of Conformity |
| ASUSTeK COMPUTER INC. | 4F, No. 150, | TAIWAN | ASUS COMPUTER GmbH | HARKORT STR. | GERMANY | declare the following apparatus: | NFC sensor box with USB 3.0 hub | conform with the essential requirements of the following directives: |
| EN 55024:2010 EN | EN 301 | EN 301 | EN 301 | EN 301 |
|
| EN 60065:2002 / A12:2011 | Regulation (EC) No. 278/2009 |
|
|
|
| (EC conformity marking) |
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
We, the undersigned, | Manufacturer: | Address, City: | Country: | Authorized representative in Europe: | Address, City: | Country: | Product name : | Model name : | EN 55022:2010 EN | EN 300 328 | EN 300 | EN 301 893 | EN 50360:2001 EN 62479:2010 EN 50385:2002 EN 62311:2008 | EN | Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 |
| CE marking |
|
|
|
|
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. |
|
|
|
|
|
|
| Ver. 120601 |
|
| ||||||
DECLARATION OF CONFORMITY |
|
|
| Responsible Party Name: Asus Computer International | Address: 800 Corporate Way, Fremont, CA 94539. |
|
|
|
| Product Name : NFC sensor box with USB 3.0 hub |
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
Per FCC Part 2 Section 2. 1077(a) |
|
| Phone/Fax No: |
| hereby declares that the product |
| Model Number : | Conforms to the following specifications: | FCC Part 15, Subpart B, Unintentional Radiators | Supplementary Information: | Representative Person’s Name : Steve Chang / President |
|
|
|
| Signature : Date : May 10, 2013 |
|
|
|
| ||||||||||||||||||
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|