Getting Started 3

Using Battery Power

The Notebook PC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a Notebook PC retailer.

Installing and Removing the Battery Pack

Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.

IMPORTANT! Never attempt to remove the battery pack while the Notebook PC is turned ON, as this may result in the loss of working data.

1. Remove all cables.

WARNING! Because telephone lines carry electrical current, you must remove the phone (modem) cable before removing the bottom cover.

3. Remove the following screws.

2. Lock the battery power.

UnLock Lock

Installing the battery pack: Insert the outer side and then press down on the inner side.

11

1

2

2

2

1

1

2

Removing the battery pack: Lift from the inner

side.

23