Asus P2-99 Test, Jumpers, WARNING, 4.Voltage Regulator Output Setting (VCORE), 5.CPU Bus Frequency Selection (FS0, FS1, FS2, FS3)

SETUP H/W .III

Jumpers

III.HARDWARE SETUP

4.Voltage Regulator Output Setting (VCORE)This jumper sets the core voltage supplied to the microprocessor.

VCORE

3 3

2 2

1 1

Normal Test (Default)

P2-99

P2-99 CPU Core Voltage Setting

WARNING! Using a higher voltage Test may help when overclocking but may result in the shortening of your computer component’s life. It is strongly recommended that you leave both the VIO and VCORE jumpers on their default set- tings.

5.CPU Bus Frequency Selection (FS0, FS1, FS2, FS3)

This option tells the clock generator what frequency to send to the CPU, DRAM, and 440ZX AGPset. This allows the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock multiplied by the BUS Multiple equals the CPU’s Internal frequency (the advertised CPU speed).

		1	2	3	1	2	3	1	2	3	1	2	3	1	2	3	1	2	3
		FS3
		FS2
		FS1
		FS0
	CPU	66.8MHz			75.0MHz			83.30MHz 100.30MHz 103.0MHz									105MHz
	PCI	33.4MHz			37.5MHz			41.65MHz			33.43MHz			34.3MHz			35MHz
		1	2	3	1	2	3	1	2	3	1	2	3	1	2	3	1	2	3
		FS3
		FS2
		FS1
	CPU	FS0
P2-99		110.00MHz112.00MHz115.00MHz									120MHz			124MHz			124.00MHz
	PCI	36.67MHz 37.33MHz 38.33MHz									40MHz			31MHz			41.33MHz
		1	2	3	1	2	3	1	2	3	1	2	3
P2-99 CPU External Clock		FS3
		FS2
(BUS) Frequency Selection
		FS1
	CPU	FS0
		133.0MHz 133.00MHz 140MHz									150.0MHz
	PCI	33.3MHz			44.33MHz			35MHz			37.5MHz

16 ASUS P2-99 User’s Manual