VII. APPENDIX

The ASUS S370 CPU Card

IMPORTANT: Your system must have a VCMOS signal level of exactly 2.5Volts in order to use the S370 CPU card.

The optional ASUS S370 CPU card allows Slot 1 motherboards to accept socket 370 processors. The ASUS S370 CPU card gives Slot 1 motherboard owners an inexpensive way to upgrade their Pentium II computers using lower costing socket 370 pro- cessors. Since socket 370 processors are based on the Pentium II design, the only difference is the connector and the amount of internal cache within the processor.

The following picture shows the ASUS S370 CPU card with a plastic retainer attached to the edge. The retainer is used to hold the ASUS S370 CPU card in place using the motherboard’s Slot 1 retention mechanism.

ASUS S370 CPU Card Retainer
APPENDIX

S370 CPU Card

VII.

ASUS

 

 

FinFin
Slot 1 Compatible Connector

Using the ASUS S370

The general procedure for using the ASUS S370 CPU card:

1.Check the voltage setting for your socket 370 processor using the jumpers on the card if necessary. For current socket 370 processors, the default setting should be used. See the reverse side of the ASUS S370 CPU card or the next page for voltage settings.

2.Install the socket 370 processor. Installation of socket 370 processors is exactly like socket 7 processors. Lift the brown lever to 90° to install the processor and lower the brown lever to lock the processor.

3.Insert the ASUS S370 CPU card into Slot 1 on the motherboard. The two fins on the sides of the ASUS S370 CPU card must catch on the retention mecha- nism so that it locks in place.

4.Connect the socket 370 processor’s fan connector to the motherboard.5.Make sure that no wires or objects come in contact with the fan.

ASUS P2-99B User’s Manual

83