10.System panel connectors (20-pin PANEL)
This connector accommodates several system front panel functions.
| Power LED | Speaker |
| Connector |
| GND | PLED Keylock | +5V | Ground Ground Speaker |
| | | | 20 |
| 1 | MLED ExtSMI# Ground PWR Ground | Reset Ground |
| +5 VSB |
| | | | Reset SW |
P4B-MX | MessageLED | ATX Power |
| SMI Lead | | Switch* |
| | | |
P4B-MX System Panel Connectors * Requires an ATX power supply.
Figure 2-34 System Panel Connectors
•System Power LED Lead (3-1 pin PWRLED)
This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
•Keyboard Lock Lead (1-pin KEYLOCK)
This lead connects to a chassis-mounted switch to allow the use of the keyboard lock feature.
•System Warning Speaker Lead (4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker and allows you to hear system beeps and warnings.
•System Message LED Lead (2-pin MSGLED)
This 2-pin connector is for the system message LED that indicates receipt of messages from a fax/modem. The normal status for this LED is ON, when there is no incoming data signal. The LED blinks when data is received. The system message LED feature requires an ACPI OS and driver support.
ASUS P4B-MX motherboard user guide | 2-27 |