Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus p4b266 4.5.2 Hardware Monitor, MB Temperature [xxxC/xxxF], CPU Temperature [xxxC/xxxF], CPU Fan Speed [xxxxRPM], Power Fan Speed [xxxxRPM), Chassis Fan Speed [N/A]

1 136

Download 136 pages, 3.98 Mb

4.5.2 Hardware Monitor

MB Temperature [xxxC/xxxF]

CPU Temperature [xxxC/xxxF]

The onboard hardware monitor automatically detects the motherboard and CPU temperatures and shows the values opposite these items.

CPU Fan Speed [xxxxRPM]

Power Fan Speed [xxxxRPM)

Chassis Fan Speed [N/A]

The onboard hardware monitor automatically detects the CPU and chassis fan speeds in rotations per minute (RPM).

VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

If any of the monitored items is out of range, the following error message appears: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue or DEL to enter SETUP”.

ASUS P4B266 motherboard user guide

4-29

Contents

Page E884 First Edition November Chapter 1: Product introduction Chapter 2: Hardware information Chapter 4: BIOS setup Chapter 5: Software support Glossary G-1 Index Federal Communications Commission Statement Canadian Department of Communications Statement This class B digital apparatus complies with Canadian ICES-003 Electrical safety Operation safety How this guide is organized Conventions used in this guide Where to find more information ASUSTeK COMPUTER INC. (Asia-Pacific) ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) Product introduction Page Thank you for buying the ASUS® P4B266 motherboard ASUS P4B266 motherboard user guide 1.3.1 Product highlights Latest processor technology DDR memory support USB 2.0 technology (optional) ASUS POST Reporter™ 1.3.2 Value-addedsolutions Overclocking ASUS iPanel support Special Card Reader support 1.4.1 Motherboard components Page ATX 12V connector CPU socket North bridge controller DDR DIMM sockets ATX power connector Super I/O controller DIP switches Speech controller Flash EEPROM South bridge controller PCI slots LAN PHY AGP slot PS/2 mouse port RJ-45 Hardware information Page 2.1.1 Placement direction 2.1.2 Screw holes Chapter 2: Hardware information Page 2.4.1 Overview 2.4.2 Installing the CPU Page 2.4.3 Installing the heatsink and fan Page 2.4.4 Connecting the CPU fan cable 2.5.1 Overview 2.5.2 Memory configurations 2.5.3 Installing a DIMM 2.5.4 Removing a DIMM 2.6.1 Installing an expansion card 2.6.2 Configuring an expansion card Standard Interrupt Assignments IRQ assignments for this motherboard 2.6.3 PCI slots 2.6.4 AGP slot 2.6.5 CNR slot 1.JumperFree™ mode (JEN) 2.CPU Core:Bus frequency multiple (SWITCH Switches 1-4) 3.CPU frequency selection (SWITCH Switches 5-9) 4.Keyboard power (3-pinKBPWR) 5.DDR voltage (4-pinDDR_OV) 6.USB device wake-up (3-pinUSBPWR01, USBPWR23) 7. Speaker selector (3-pinSPEECH) 8.VCORE over-voltage (3-pinOVER_VOLT) 9.Line out selector (two 2-pinLO_L, LO_R) (on audio models only) 10.Bass/Center setting (3-pinBCS1, BCS2) (on audio models only) 11.USB 2.0 setting (3pin USB20_EN) (on audio models only) 12.Clear RTC RAM (CLRTC) 1.Hard disk activity LED (2-pinHDDLED) 2.IDE connectors (40-1pin PRIMARY IDE/SECONDARY IDE) 3.Floppy disk drive connector (34-1pin FLOPPY) 4.Chassis open alarm lead (4-1pin CHASSIS) 5.CPU, Chassis, and Power Fan Connectors (3-pinCPU_FAN, PWRFAN, CH_FAN) Page 7.USB headers (10-1pin USB11_23, USB20_12, USB20_34) 8.SMBus connector (6-1pin SMB) 9.Internal audio connectors (4-pinCD1, AUX, MODEM) (optional) 10.Line in connector (5-pinLINE_IN) (optional) 11.Front panel audio connector (10-1pin IAPANEL) (optional) 12.ASUS iPanel connector (24-1pin AFPANEL) (optional) 13.Digital audio connector (6-1pin SPDIF_C) (optional) 14.Smart Card Reader connector (14-1pin SMARTCON) (optional) 15.SD and MS connectors (10-pinSD, MS) 16.Infrared module connector (two 5-1pin IR_CON) UART2 Use As 17.Power supply thermal connector (2-pinTRPWR) 18.System panel connector (20-pinPANEL) •System Power LED Lead (3-1pin PLED) •Keyboard Lock Lead (2-pinKEYLOCK) •System Warning Speaker Lead (4-pinSPEAKER) •System Message LED Lead (2-pinMLED) •ATX Power Switch / Soft-OffSwitch Lead (2-pinPWRBTN) •Reset Switch Lead (2-pinRESET) Page Powering up Page Award BIOS Beep Codes POST Message Action Chapter 3: Powering up Page Page BIOS setup Page 4.1.1 Using the computer system for the first time Chapter 4: BIOS Setup 4.1.2 Updating BIOS procedures Page Page 4.2.1 BIOS menu bar 4.2.2 Legend bar General help Saving changes and exiting the Setup program Scroll bar Sub-menu System Time [XX:XX:XX] System Date [XX/XX/XXXX] Legacy Diskette A [1.44M, 3.5 in.] Floppy 3 Mode Support [Disabled] 4.3.1 Primary and Secondary Master/Slave Type [Auto] [User Type HDD] Translation Method [LBA] Cylinders Head Sector CHS Capacity SMART Monitoring [Disabled] PIO Mode [4] Ultra DMA Mode [Disabled] 4.3.2 Keyboard Features Boot Up NumLock Status [On] Keyboard Auto-RepeatRate [6/Sec] Keyboard Auto-RepeatDelay [1/4 Sec] Language [English] Supervisor Password [Disabled] / User Password [Disabled] A note about passwords Forgot the password Halt On [All Errors] CPU Speed [Manual] CPU Frequency Multiple (when CPU Speed is set to [Manual]) CPU Frequency (MHz) (when CPU Speed is set to [Manual]) CPU/Memory Frequency Ratio [Auto] CPU VCore Setting [Auto] CPU VCore [1.750V] CPU Level 1 Cache, CPU Level 2 Cache [Enabled] BIOS Update [Enabled] PS/2 Mouse Function Control [Auto] USB Legacy Support [Auto] OS/2 Onboard Memory > 64M [Disabled] ASIC SMBus Mode [Mux] 4.4.1 Chip Configuration SDRAM Configuration [By SPD] SDRAM CAS Latency [2.5T] SDRAM RAS to CAS Delay [3T] SDRAM RAS Precharge Delay [3T] SDRAM Active Precharge Delay [6T] SDRAM Idle Timer [Infinite] Optimization Mode [Normal] Graphics Aperture Size [64MB] Video Memory Cache Mode [UC] Memory Hole At 15M-16M[Disabled] Delayed Transaction [Disabled] Onboard PCI IDE [Both] Onboard PCI Audio [Enabled] 4.4.2 I/O Device Configuration Floppy Disk Access Control [R/W] Onboard Serial Port 1 [3F8H/IRQ4] Onboard Serial Port 2 [2F8H/IRQ3] UART2 Use As [COM Port] Parallel Port Mode [ECP+EPP] ECP DMA Select [3] Onboard Card Reader Type [Disabled] Onboard AC97 Audio Controller [Auto] Onboard AC97 Modem Controller [Auto] 4.4.3 PCI Configuration Slot 1/5, Slot 2, Slot 3, Slot 4, Slot 6 IRQ [Auto] PCI/VGA Palette Snoop [Disabled] PCI Latency Timer [32] USB Function [Enabled] Primary VGA BIOS [PCI VGA Card] Onboard LAN Boot ROM [Disabled] IRQ XX Reserved [No/ICU] Power Management [User Defined] Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] HDD Power Down [Disabled] ACPI Suspend To RAM [Disabled] Suspend Mode [Disabled] 4.5.1 Power Up Control AC PWR Loss Restart [Disabled] Wake/Power Up On Ext. Modem [Disabled] Power Up On PCI Card [Disabled] Power On By PS/2 Keyboard [Space Bar] Power On By PS/2 Mouse [Disabled] Automatic Power Up [Disabled] 4.5.2 Hardware Monitor MB Temperature [xxxC/xxxF] CPU Temperature [xxxC/xxxF] CPU Fan Speed [xxxxRPM] Power Fan Speed [xxxxRPM) Boot Sequence Removable Device [Legacy Floppy] IDE Hard Drive ATAPI CD-ROM Other Boot Device Select [INT18 Device (Network)] Plug & Play O/S [No] Reset Configuration Data [No] Boot Virus Detection [Enabled] Quick Power On Self Test [Enabled] Interrupt Mode [APIC] Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Software support Page 5.2.1 Running the support CD 5.2.2 Main menu 5.2.3 Software menu ASUS Update Intel® LDCM Administrator Setup Intel® LDCM Client Setup ASUS BIOS Flash Utility ASUS PC Probe Winbond Voice Editor Cyberlink Video and Audio Applications Direct 5.2.4 Drivers menu INF Driver Intel® Application Accelerator Winbond Memory Stick Storage Device Driver Winbond Secure Digital Storage (SD/MMC) Device Driver 5.2.5 DOS Utilities menu 5.2.6 ASUS Contact Information 5.2.7 Other information Motherboard Info Browse this CD Technical Support Form Readme 5.3.1 ASUS Update 5.3.2 ASUS MyLogo™ Page 5.3.3 Personalized Boot Logo 5.3.4 Winbond Voice Editor Launching the program Playing the default wave files Changing the default language Customizing your POST messages Page 5.3.5 Multi-ChannelAudio Feature Setting the C-MediaAudio Mixer Running the C-MediaAudio Demo Program Connector Settings and Functions Page Page AC’97 (Audio Codec '97) Bandwidth Data Transfer Rate Backup G-1 BIOS (Basic Input/Output System) Bit (Binary Digit) Boot Bus Master IDE Byte (Binary Term) Device Driver DOS (Disk Operating System) Expansion Card Flash ROM IDE (Integrated Drive Electronics) LAN (Local Area Network) Modem Network OS (Operating System) PC100/PC133 POST (Power On Self Test) PS/2 Port RAM (Random Access Memory) ROM (Read Only Memory) SDRAM (Synchronous DRAM) System Disk USB (Universal Serial Bus) WAN (Wide Area Network) G-6 Page Page Page Index