2.Keyboard power (3-pin KBPWR)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

KBPWR

 

3

2

2

1

 

+5V

+5VSB

(Default)

P4B533-M

P4B533-M Keyboard Power Setting

3.Line out selector (two 2-pin J3001, J3002) (on audio models only)

By default, these jumpers are shorted (jumper caps on) to route the signal from the audio controller to the rear panel Line Out jack to make it available for audio out devices such as speakers or a headphone.

If you connect the Intel Front Panel audio cable to the IPANEL connector (see page 2-26 for the location), remove the caps from these jumpers to allow automatic switching of audio signal between the rear panel Line Out jack and the audio cable.

BLOL

FLOL BLOR

FLOR

 

 

 

 

 

 

P4B533-M

J3001 J3002

P4B533-M Internal Line Out Selector

ASUS P4B533-M motherboard user guide

2-17