Asus P4BGL-MX 5.USB headers (10-1pin USB1), 4.ATX power connectors (20-pinATX_POWER1)

4.ATX power connectors (20-pin ATX_POWER1)

These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

In addition to the 20-pin ATXPWR connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU.

			ATX_POWER1
			Pin 1
			+12.0VDC	+5.0VDC
			+5VSB	+5.0VDC
	ATX12V1		PWR_OK	-5.0VDC
			COM	COM
	+12V DC	+12V DC	+5.0VDC	COM
			COM	COM
P4BGL-MX	GND	GND	+5.0VDC	PS_ON#
			COM	COM
			+3.3VDC	-12.0VDC
			+3.3VDC	+3.3VDC

P4BGL-MX ATX Power Connectors

If you will need to replace the power supply in the future, make sure that your new ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate.

5.USB headers (10-1 pin USB1)

USB1 is for the internal USB header that you can connect to the front USB ports.

P4BGL-MX

P4BGL-MX USB 2.0 Header

USB20_5 USB20_6 1

USB+5V	LDM5	LDP5	GND	NC
USB+5V	LDM6	LDP6	GND

1-14 Chapter 1: Motherboard Information