DRAM Frequency [Auto]

Allows you to set the DDR operating frequency.

Configuration options: [Auto] [333 MHz] [400 MHz] [600 MHz]

Selecting a DRAM frequency that is not supported by your DIMM module may cause the system to become unstable! If this happens, revert to the default setting. See page 2-14 for qualified DDR DIMMs.

PCI Express Frequency [Auto]

Sets the PCI Express frequency. Configuration options: [Auto] [90] ~ [133]

PCI Clock Synchronization Mode [Auto]

Selects the PCI Clock Synchronization mode.

Configuration options: [To CPU] [33.33MHz] [Auto]

Spread Spectrum [Auto]

Enables, disables or set to Auto the clock generator spread spectrum. Configuration options: [Disabled] [Enabled] [Auto]

4.4.2LAN Cable Status

The items in this menu displays the status of the Local Area Network (LAN) cable.

POST Check LAN cable

[Disabled]

LAN Cable Status

 

 

Pair

Status

Length

 

 

 

 

 

1-2

Open

0.0M

 

3-6

Open

0.0M

 

4-5

Open

0.0M

 

7-8

Open

0.0M

 

POST Check LAN cable [Disabled]

Enables or disables checking of the LAN cable during POST. Configuration options: [Disabled] [Enabled]

4 - 20

Chapter 4: BIOS setup