5 . USB connectors (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

P4GPL-X

P4GPL-X USB 2.0 connectors

USB+5V USB_P6- USB_P6+ GND NC

USB+5V USB_P8- USB_P8+ GND NC

USB56

USB78

1

1

USB+5V USB_P5- USB_P5+ GND

USB+5V USB_P7- USB_P7+ GND

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

6 . Optical drive audio connector (4-pin CD)

This connector is for the 4-pin audio cable that connects to the audio connector at the back of the optical drive.

Right Audio Channel

Ground

Ground

Left Audio Channel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD

 

 

 

P4GPL-X

 

 

 

P4GPL-X CD audio connector

1 - 30

Chapter 1: Product introduction