1.12 Connectors

This section describes and illustrates the internal connectors on the motherboard.

1.Floppy disk drive connector (34-1 pin FLOPPY1)

This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug).

P4P800-MX

FLOPPY1

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

PIN 1

P4P800-MX Floppy Disk Drive Connector

1-20

Chapter 1: Product introduction