•Reset Switch Lead (Blue 2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the system power.

•ATX Power Switch / Soft-Off Switch Lead (Yellow 2-pin PWRBTN )

This connector connects a switch that controls the system power. Pressing the power switch turns the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more than four seconds turns the system OFF.

•Hard disk activity LED (Red 2-pin IDE_LED)

This connector supplies power to the hard disk activity LED. Any read or write activity of an IDE device causes this LED to light up.

The System Panel connector is color-coded for easy and foolproof connection. Take note of the specific connector colors as described.

1-22

Chapter 1: Product introduction