2.7Jumpers

The jumpers on the motherboard allow you to change some feature settings to suit your customized system configuration.

Before changing any jumper setting, make sure to read the jumper descriptions and setting requirements in this section.

1.USB device wake-up (3-pin USBV1, USBV2)

Set these jumpers to pins 2-3 (+5VSB) to wake up the computer using the connected USB devices. Set to pins 1-2 (+5V) to disable the USB wake-up feature.

The USB device wake-up feature requires a power supply that can provide at least 1A on the +5VSB lead. If this requirement is not met, the system does not power up. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.

P4S333-VF

®

 

USBV1

 

3

2

2

1

 

+5V+5VSB (Default)

USBV2

1

2

 

2

3

 

 

 

 

 

+5V+5VSB (Default)

P4S333-VF USB Device Wake Up

ASUS P4S333-VF motherboard user guide

2-17