Asus P4S533-E 11.Floppy Disk Drive connector (34-1pin FLOPPY), 12.Fan connectors (3-pinPWRFAN1, CPUFAN1, CHASFAN1)

11.Floppy Disk Drive connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug).

FLOPPY1

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

P4S533-E

PIN 1

P4S533-E Floppy Disk Drive Connector

12.Fan connectors (3-pin PWRFAN1, CPUFAN1, CHASFAN1)

The fan connectors support cooling fans of 350mA (4.2 Watts) or a total of 1A (12W) at +12V. Orient the fans so that the heat sink fins allow air flow to go across the onboard heat sinks instead of the expansion slots. The fan wiring and plug may vary depending on the fan manufacturer. Connect the fan cable to the connector matching the black wire to the ground pin.

Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!

	PWRFAN1
	GND +12V Rotation
	CPUFAN1
	GND
	+12V
P4S533-E	Rotation

CHASFAN1

Rotation

+12V

GND

P4S533-E 12-Volt Fan Connectors

36 Chapter 2: Hardware information