Asus P4S533 VDDR, Setting, ASUS P4S533 motherboard user guide, 4.DDR Voltage Setting (4 pin DDRVOL1), 5. Bass Center Setting (2x3 pin BCS1, BCS2)

4.DDR Voltage Setting (4 pin DDRVOL1)

This jumper controls the voltage output to the DDR memory DRAMS.

Setting		VDDR
2.9V	[3-4]
2.7V	[2-3]
2.5V		[1-2] (default)

DDRVOL1

1 2 2 3 3 4

2.5V 2.7V 2.9V

P4S533 (Default)

P4S533 DDRVOL Setting

CAUTION! It is advisable not to increase the voltage excessively to prevent the memory system from being exposed to undue strain.

5. Bass Center Setting (2x3 pin BCS1, BCS2)

Use these jumpers in conjunction with the C-Media PCI Audio Driver and to adjust output for 4 or 6 speaker audio. No audio standard exists for the three pick-up surfaces on male audio jacks, therefore it may be necessary to switch jumpers from the default position, Bass/Center, to Center/Bass, in order to reroute signals among the internal leads of the Line-In, Line-Out, Mic female sockets. Make sure a test is made using the Audio Driver software setup available on the Support CD.

	1	2	2	3
	BCS1		BCS1
P4S533	BCS2		BCS2
	(CENTER/BASS)		(BASS/CENTER)
	(Default)

P4S533 Bass Center Setting

ASUS P4S533 motherboard user guide 27