2.6.4Security

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.

Security Settings

 

 

<Enter>

to change

Supervisor Password

: Not

Installed

password.

<Enter>

again to

User Password

: Not

Installed

disabled password.

Change Supervisor Password

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a Supervisor Password:

1.Select the Change Supervisor Password item and press <Enter>.

2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message ÒPassword InstalledÓ appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a user password.

To clear the supervisor password, select the Change Supervisor Password then press <Enter>. The message ÒPassword UninstalledÓ appears.

If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section Ò1.9 JumpersÓ for information on how to erase the RTC RAM.

ASUS P4S8X-MX

2 - 35