Panel Connector (20 pin PANEL)The following diagram illustrates items 25-29:

Keyboard Lock Speaker

Power LED

Connector

P4S8X

+5 V

PLED Keylock Ground

+5V

Ground Ground Speaker

 

ExtSMI# Ground

PWR Ground

Reset Ground

 

 

 

Reset SW

SMI Lead

 

ATX Power

 

Switch*

* Requires an ATX power supply.

P4S8X System Panel Connectors

25. System Power LED Lead (3-1 pin PLED)

This connector supplies the system power LED. The LED lights up when the system power is on, and the LED blinks when the system is in sleep or soft-off mode.

26. System Warning Speaker Lead (4 pin SPEAKER)

This connector supplies the case-mounted speaker to sound system beeps and warnings.

27. System Management Interrupt Lead (2 pin SMI)

This connector permits switching to suspend mode, or “Green” mode: system activity is decreased to conserve power and system components. Attach the case-mounted suspend switch this 2-pin connector.

28. ATX Power Switch / Soft-Off Switch Lead (2 pin PWRSW)

The system power is controlled by a momentary switch attached to this connector. Pressing the button switches the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the button while in the ON mode for more than 4 seconds turns the system off.

29. Reset Switch Lead (2-pin RESET)

This connector supports the case-mounted reset switch for rebooting the system without turning off the power switch.

40

Chapter 2: Hardware information