Asus P4T-F 3.7.3Accelerated Graphics Port (AGP Pro), 3.7.4 Communications and Networking Riser (CNR)

3.HARDWARE SETUP

3.7.3Accelerated Graphics Port (AGP Pro)

This motherboard provides an accelerated graphics port (AGP Pro) to support a new generation of AGP graphics cards with ultra-high memory bandwidth.

AGP Card without Retention Notch

			TOP VIEW
P4T-F
	20-pin bay		28-pin bay
	Rib (inside slot)	Rib

P4T-F Accelerated Graphics Port (AGP PRO)

IMPORTANT: Only 1.5V AGP cards are supported. ASUS® AGP 4X cards are rated for both 1.5 and 3.3 Volts. Early AGP cards only operate at 3.3 volts and will not fit properly into the new AGP 4X slots. See examples of both types below:

An early 3.3V AGP card:	A new 1.5 / 3.3V AGP card:
Do not use.	OKAY to use.

.3 SETUPH/W

Expansion Cards

3.7.4 Communications and Networking Riser (CNR)

This connector supports specially designed network, audio, or modem riser cards. Main processing is done through software adn controlled by the motherboard’s system chipset. This provides upgradeable network, audio, and/or modem solutions at an incredibly low cost.

P4T-F

P4T-F Communication & Networking Riser Connectors

ASUS P4T-F User’s Manual 31