4.ATX power connectors (20-pin ATXPWR1)

These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate.

P4V533-MX

ATXPWR1

+12.0VDC +5.0VDC

+5VSB +5.0VDC

PWR_OK -5.0VDC

COM COM

+5.0VDC COM

COM COM

+5.0VDC PS_ON#

COM COM

+3.3VDC -12.0VDC

+3.3VDC +3.3VDC

P4V533-MX ATX Power Connectors

5.CPU and chassis fan connectors (3-pin CPU_FAN1, CHA_FAN1)

The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!

CPU_FAN1

Rotation +12V GND

CHA_FAN1

P4V533-MX

Rotation +12V GND

P4V533-MX 12-Volt Cooling Fan Power

ASUS P4V533-MX motherboard user guide

1-19