2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the
Chipset Settings |
|
DRAM Frequency | [Auto] |
DRAM CAS# Latency | [Auto] |
DRAM Bank Interleave | [Auto] |
Precharge to Active(Trp) | [Auto] |
Active to Precharge(Tras) | [Auto] |
Active to CMD(Trcd) | [Auto] |
REF to ACT/REF to REF(Trfc) | [Auto] |
ACT(0) to ACT(1) (Trrd) | [Auto] |
Read to Precharge (Trtp) | [Auto] |
Write to Read CMD (Twtr) | [Auto] |
Write Recovery Time (Twr) | [Auto] |
DRAM Command Rate | [2T Command] |
DRAM Multiple Page Mode | [Auto] |
Flexibility Option | [Disabled] |
DRAM Voltage | [Auto] |
Memory Clock can be set by the code using AUTO, or you can set one of the standard values.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit ESC Exit
v02.58 (C)Copyright
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency. If you seclect [Auto], the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. Configuration options: [Auto] [133MHz (DDR266)] [166MHz (DDR333)] [200MHz (DDR400)]
DRAM CAS# Latency [Auto]
This item controls the laterncy between the SDRAM read command and the time the data actually becomes available. Configuration options: [Auto] [2.0] [2.5] [3.0]
DRAM Bank Interleave [Auto]
Allows you to select the DRAM Bank Interleave. Configuration options: [Auto] [Disabled]
Precharge to Active(Trp) [Auto]
Configuration options: [Auto] [2T] [3T] [4T] [5T]
Active to Precharge(Tras) [Auto]
Configuration options: [Auto] [5T] [6T] [7T] [8T] [9T] [10T] [11T] [12T] [13T] [14T] [15T] [16T] [17T] [18T] [19T]
Active to CMD(Trcd) [Auto]
Configuration options: [Auto] [2T] [3T] [4T] [5T]
REF to ACT/REF to REF(Trfc) [Auto]
Configuration options: [Auto] [8T] [9T] [10T] [11T] [12T] [13T] [14T] [15T] [16T] [17T] [18T] [19T] [20T] [21T] [22T]
Chapter 2: BIOS Information |