Asus P5B-E Plus Hard Disk Write Protect [Disabled], IDE Detect Time Out (Sec) [35], ACHI Port0~5 [XXXX], Configure SATA as, IDE Configuration, 4.3.7AHCI Configuration

If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI].

Hard Disk Write Protect [Disabled]

Disables or enables device write protection. This will be effective only if device is accessed throuh BIOS. Confiuration option: [Disabled] [Enabled]

IDE Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices.

Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]

4.3.7AHCI Configuration

This menu is the section for AHCI configuration. It appears only when you set the item Configure SATA as from the sub-menu of IDE Configuration to [AHCI].

	BIOS SETUP UTILITY
Main
AHCI Settings	While entering setup,
	BIOS auto detects
AHCI Port0 [Not Detected]	the presence of IDE
	devices. This displays
AHCI Port1 [Not Detected]	the status of auto
AHCI Port2 [Not Detected]	detection of IDE
AHCI Port3 [Not Detected]	devices.
AHCI Port4 [Not Detected]
AHCI Port5 [Not Detected]
		Select Screen
		Select Item
	Enter Go to Sub Screen
	F1	General Help
	F10	Save and Exit
	ESC	Exit

v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.

ACHI Port0~5 [XXXX]

Displays the status of auto-detection of IDE devices.

AHCI	Port0
Device		:Not Detected
SATA	Port0	[Auto]

Select the type of device connected to the system

SATA Port0 [Auto]

Allows you to select the type of device connected to the system. Configuration options: [Auto] [Not Installed]

ASUS P5B-E Plus 4-15