PIO Mode [Auto]

Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]. Only [Auto] is showed if no SATA device is installed in the system.

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

2.3.5IDE Primary Master/Slave

The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press <Enter> if you wish to configure the item.

IDE Primary Master

Device

: Not Detected

 

LBA/Large Mode

 

[Auto]

Block(Multi-Sector Transfer)

[Auto]

PIO Mode

 

[Auto]

DMA Mode

 

[Auto]

Smart Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

Select the type of device connected to the system.

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These values are not user-configurable. These items show Not Detected if no IDE device is installed in the system.

2-16

Chapter 2: BIOS setup