Memory Remap Feature [Enabled]

Allows you to enabled or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64-bit operating system. Configuration options: [Disabled] [Enabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]

Internal Graphics Mode Select [Enabled, 8MB]

Allows you to decide whether to use the internal graphics device and select the amount of memory used by the device.

Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]

Set this item to [Disabled] if you intend to install a PCIE x16 graphics card to the PCIE x16 slot.

PEG Port Control [Auto]

Configuration options: [Auto] [Disabled]

PEG Force x1 [Disabled]

This item appears when the PEG Port Control item is set to [Auto].

Configuration options: [Enabled] [Disabled]

The following item appears when the Internal Graphics Mode Select item is set to [Enabled, 1MB] or [Enabled, 8MB].

Video Function Configuration

BIOS SETUP UTILITY

 

Advanced

 

 

 

 

Video Function Configuration

 

 

 

Options

DVMT Mode Select

[DVMT Mode]

 

Fixed Mode

DVMT/FIXED Memory

[256MB]

 

DVMT Mode

DVMT Mode Select [DVMT Mode]

Configuration options: [Fixed Mode] [DVMT Mode]

DVMT/FIXED Memory [256MB]

Configuration options: [128MB] [256MB]

ASUS P5E-VM HDMI

4-23